Xinxiang Hundred Percent Electrical and Mechanical Co.,Ltd is one of the leading and productive manufacturer, supplier and exporter of material handling equipment.
Working principle:
KPDZ series railway flat carts are powered by the low voltage electricity from the railways. The power source AC 380v is transformed into AC 36v two-phase
and are respectively connected to the two rails. Then the flats’ wheels conduct the AC 36v on rail into the electrical appliance box at the bottom of the carts. And
then the AC 36v is transformed into DC 36v and then control the DC motor through the DC control system to make the flat carts start, stop, go forward and backward
and adjust the speed and so on.
De
KPDZ flat carts can be used both on the ‘S’ and arc-shaped railways. They also can be used in the high- temperature environment. The hydraulic lifting device
can be installed on the flat carts. The DC motor has the advantages of safety, flexibility, stable start, big starting torque, small impact to the gear reducer, low voltage,
long lifetime and so on. But this series have strict requirement on the construction of the railways which need to be insulated. The rated load can not be more than 50T.
This series’ flat carts are suitable to be used in such condition: higher using frequency, not too short running distance.
Techinacal parameters:
Type |
KPDZ-40T |
Rated load(t) |
400 |
Table size(mm) |
5000' 2500' 700 |
Speed(m/min) |
25 |
Wheel tread(mm) |
2800 |
Wheel diameter(mm) |
400 |
Bottom-clearance(mm) |
60 |
Min. turning radius |
55 |
Rail guage(mm) |
1435 |
Motor power(kw) |
5.5 |
Storage battery |
YZ160M1-6 |
Rail code |
P43 |
Wheel quality |
4 |
Structure |
Crane box and girder |
Max. wheel load(t) |
11.5 |