HF RFID module(JMY609A)

 JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the module imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the JMY609 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. There are 2 SAM card slots in the reader. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job.

    Qualifications:
     Model number:JMY609A,JMY609C
     PCD: NXP RC522, RC523
     Working frequency: 13.56MHz
     RF standard: ISO14443A, ISO14443B
     Operating distance: 80mm (Mifare One, typical distance)
     SAM card slot: 2 slots, (supported ISO7816 T=0 and T=1)
     Interface: USB (HID standard)
     Power supply: DC5V
     Power consumption: 180mA
     Dimension: 123mm×88mm×25mm
     Weigh: about 100g
     Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
     Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)

Model Number	PCD	RF protocol
JMY609A	NXP RC522	ISO14443A
JMY609C	NXP RC523	ISO14443A.ISO14443B